How to Make a Cube: Intro to Metalworking

at Metal Shop Fantasy Camp - Williamsburg

(269)
Course Details
Price:
$255.86 (per person) 5 seats left
Start Date:

Thu, May 07, 7:15pm - 11:15pm

Next start dates (13)

Location:
Williamsburg, Brooklyn
175 Bogart St
Btwn Stagg & Scholes Streets
Brooklyn, New York 11206
(Map)
Share:
Purchase Options
Description
Class Level: Beginner
Age Requirements: 12 and older
Average Class Size: 8

What you'll learn in this metal working class:

Through the making of this small steel cube, you will learn a tremendous set of skills that can used to make anything in metal. Whether it is a custom dining table, a lamp or a sculpture.

The skills to practice will focus on:
  • Measuring 
  • Cutting 
  • Fitting 
  • Clamping 
  • Jig making
  • MIG welding
  • Grinding
  • Sanding
  • Filing
  • Fine finishing 
During this 4-hour long class that is purely focused on rapid learning, participants will take a 20’ length of 1” x 1” x 1/8” steel tube and turn it into a beautiful 6” x 6” x 6” cube. 

What to Bring and Wear: 
  • All you need to bring is something to wear which you don't mind getting dirty, preferably jeans or workpants. Do not wear Flannel, sweat pants or Polyester. 
  • Close toed shoes required, preferaby boots.  
Important:
For Students below 18, a Guardian needs to sign a Waiver on their behalf. 

Still have questions? Ask the community.

Refund Policy
Please allow four days' notice to reschedule a booking. A $45 fee per student will be required to reschedule after this time. There will be no refunds for day of cancellations and no-shows. If you are visibly intoxicated you will not be able to participate in the class.

Map

Google Map

Metal Shop Fantasy Camp

All classes at this location

Start Dates (14)
Start Date Time Teacher # Sessions Price
7:15pm - 11:15pm TBD 1 $255.86
11:15am - 3:15pm TBD 1 $255.86
7:15pm - 11:15pm TBD 1 $255.86
11:15am - 3:15pm TBD 1 $255.86
7:15pm - 11:15pm TBD 1 $255.86
Start Date Time Teacher # Sessions Price
7:15pm - 11:15pm TBD 1 $255.86
11:15am - 3:15pm TBD 1 $255.86

Benefits of Booking Through CourseHorse

Booking is safe. When you book with us your details are protected by a secure connection.
Lowest price guaranteed. Classes on CourseHorse are never marked up.
This class will earn you 2559 points. Points give you money off your next class!
Questions about this class?
Get help now from a knowledge expert!
Questions & Answers (4)

Get quick answers from CourseHorse and past students.

Question from Sole
How many days or hours are per class? Thank you!
Answer from Brenda L. CourseHorse StaffCourseHorse Staff
Hi there! This is a one-day class and the class duration is 4 hours. You may check the schedule at the "Start Date" section of this page. Thanks!
Answer
Cancel
Question from anonymous
I have a big head, will the welder helmet be able to fit me? I'm worried about it not being able to fit.
Answer from Brenda L. CourseHorse StaffCourseHorse Staff
Hi there! They have helmets in small, medium, and large. We think you should be fine. :)
Answer
Cancel
Question from Danielle P.
I want to give this as a gift... if the indv. doesnt like it can i return it and get my money back?
Answer from Brenda L. CourseHorse StaffCourseHorse Staff
Hi there! You would need to follow and abide by the school's refund and cancellation policy. You may read the cancellation policy above. Thanks!
Answer
Cancel
Question from Michaelo C.
Hello! I see some classes are too full and half the students don’t get around to welding or finishing their project let alone fine finishing. Has that been addressed? Also is there a day or time that is the smallest of all classes with the most effective instructor? Thank you
Answer from anonymous
We do our very best to give our students an exceptional welding experience. Rarely have we had an issue with someone not getting to weld or completing their project. Our cube class you can expect to weld for at least 2 hours. We have 5 MIG welders, 4 TIG welders, 2 band saws, plenty of hand tools and safety gear and 10 Auto Darkening Miller Welding Helmets. Class sizes are typically limited to 6 depending on the class. All of our instructors are effective.
Answer
Cancel

Reviews of Classes at Metal Shop Fantasy Camp (269)

(269 Reviews)
How to Make a Cube: Intro to Metalworking
Reviewed by ivan V. on 3/9/2020
Great time with the very knowledgeable instructors. Had a great experience!
How to Make a Cube: Intro to Metalworking
Reviewed by Anonymous on 3/8/2020
the instructors were great, they delivered what was promised. A self made cube :)
How to Make a Cube: Intro to Metalworking
Reviewed by Christopher C. on 1/27/2020
Decent class. Two instructors/monitors - Paul and Jayrod. Both are friendly, professional and knowledgable. Paul opened the class with introductions and explained, "this is about all the talking we will do" - Great! (If you would rather DO welding than chat about welding, this is the class for you). Both instructors were constantly there, milling about, looking over your shoulder, offering advice. When I had a question, I just had to look up - one of them was usually close by, and would walk over. The focus is on antendees going home with a complete steel cube. You are working almost the entire time. They could go with another belt sander, but we improvised with a grinder. The shop is a working shop. It is a safe work environment, but it is not overly clean. It is a typical metal shop - expect the bathroom to be servicable but not overly clean. Other reviews commented that the jackets had not been washed in a long time. I thought they were fairly clean, and since you are wearing them as a coat over what you have on (to keep the sparks from burning small holes in your clothes) I thought it was fine. They provide rubber and leather gloves. Gloves were clean enough, but good luck finding anything larger than size small/medium. I pulled an OJ and forced my hands into them. Welding helmets are decent enough. I went to the class to learn how to weld "better" - my welds often look like crap and I have trouble welding thin stuff. While the class was fun (and I'm going back for another), my only con for the class was that when all was said and done, I ended up welding about 18" total - not really enough to improve technique or get feedback. The stock was heavy square stock - I could have stick welded it and probably not blown through. This is not really a con for the class - they want everyone to be successful in going home with a cube and not a piece of swiss cheese. The class is great for someone who never welded before, and you will leave with a decent understanding of the basics. I run a REALLY cheap flux core welder at home, so part of my goal was to try out "better" equipment and see if it made a difference (it does). The neighborhood looked sketchy on google, but turned out to be fine. Car was safe outside and we had no problems.
How to Make a Cube: Intro to Metalworking
Reviewed by Fotios K. on 11/16/2019
Great class great instructors!!!!!
How to Make a Cube: Intro to Metalworking
Reviewed by Anonymous on 11/9/2019
The instructor was completely not prepared for the class. We spent the first hour just talking about random stuff, eventually, I had to be like "ok I want to weld now". He didn't have the parts ready for the class to weld. And WORST OF ALL, it was extremely dangerous. We have high power lines jacketed with pressurized gas behind each one of us for welding and the instructor tripped over one of the cables as drone was welding. It's a miracle they didn't burn themselves.
loading...
loading...
Similar Classes

School: Metal Shop Fantasy Camp

Metal Shop Fantasy Camp

Total Metal Resource, Inc. has made some of the hottest custom metal work in New York City and the owner is excited to pass on the knowledge he has gained through 20 years of working with metal. Introduced classes that are designed to fulfill the innate desire to make things by hand, from scratch. ...

Read more about Metal Shop Fantasy Camp

CourseHorse Approved

This school has been carefully vetted by CourseHorse and is a verified NYC educator.

Ready to take this class?
BOOK NOW
Taking this class for work? Get exclusive perks & discounts for free.